Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 143)

Stakeout Menu
R-137
Stake Curve and Offset
6WDNHRXW &XUYH DQG RIIVHW
The Stake Curve and Offset screen is used to stake stations on a
curve or at an offset to it at fixed station intervals.
6HWWLQJV : located at the top of the screen, accesses the
Stakeout Settings screen (Page R-35).
PC Point : is the starting point of the curve (point of
curvature).
3& 7DQJHQW $]P / 3& 7DQJHQW %UJ : defines the azimuth
or bearing, respectively, of the tangent at the PC Point .
5DGLXV / 'HJUHH $UF / 'HJUHH &KRUG : defines the
radius, degree arc, or degree chord of the curve,
respectively.
Turn : defines if the curve turns to the Left or Right from
the point of view of the PC.
Begin Station : is the station assigned to the PC Point .
%DFNVLJKW« : accesses the Backsight Setup screen (Page R-78).
1H[W! : takes you to the second Stake Curve and Offset screen,
described below.