Stake points – screen three – Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual User Manual
Page 120
![background image](/manuals/365118/120/background.png)
Survey Pro Reference Manual
R-114
Note: The
&LUFOH =HUR button is not available when using a robotic
total station.
%DFN : returns to the first screen.
6WDNH ! : accesses the third and final Stake Points screen where the
shots to the stake point are performed.
Stake Points – Screen Three
Height of Rod
: is the length of the rod.
Design Elev
: displays the current design elevation,
which can be modified with the
&KDQJH« button.
FORWARD
/
BACK
: indicates if the rod must move
forward (toward the total station) or backward (away
from the total station).
Go RIGHT
/
Go LEFT
: indicates if the rod must move to
the right or left from the total station’s point of view.
;
Coarse EDM (Fast Shot)
: When checked, sets the total
station to coarse mode for faster, but slightly less-precise
measurements.
CUT
/
FILL
: displays the required amount of cut or fill to
bring the stake point to the design point’s elevation.
Rod Elev
: displays the elevation at the rod’s location computed from
the last shot.
&KDQJH« : is used to modify the current design elevation, which will
also modify the associated
CUT
/
FILL
value for the current station
being staked.
6KRW : takes a shot to the prism and computes come/go, cut/fill
information.
Shot data
: displays the measurements from the last shot.
6WRUH« : stores the stake point.