Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 95)

Survey Menu
R-89
Distance Offset
6XUYH\ 'LVWDQFH 2IIVHW or , Offset Shot – Distance
The Distance Offset screen is used to store a new point that is a
known distance away from the rod location. This screen is useful
when the rod cannot occupy the new point’s location.
6HWWLQJV : located at the top of the screen, is a shortcut to
the Surveying Settings screens (Page R-34).
Foresight : is the point name that will be stored.
Desc. : is the description for the offset shot that is stored.
HR : is the length of the rod.
Offset : is the offset distance that is to the left (when L
is selected) or right (when R is selected) of the prism
from the total station’s point of view.
Horz Dist Offset : is the offset distance that is beyond the
prism (positive value) or in front of the prism (negative
value) from the total station’s point of view.
Elevation Offset : is the offset distance that is below the
prism (negative value) or above the prism (positive value).
Note: multiple offsets can be applied simultaneously.
6KRRW : will take a shot to the prism, apply the offset(s) entered,
and then store the new point.
%DFNVLJKW« : accesses the Backsight Setup screen (Page R-78)
where the current backsight can be modified.
1_ft back
3_ft right