Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 70)

Survey Pro Reference Manual
R-64
Raw Data Note
Enter any note to append to the raw data file. You can
use the buttons to insert common linework commands.
When finished, tap
:ULWH 1RZ to append the note to the
end of the raw data file.
View DTM
-RE 9LHZ '70
Before viewing a DTM, the Setup DTM 3D screen will open where the
DTM layers must be defined. This screen is also used to define other
parameters for the DTM.
/D\HUV : opens the Layers for Staking DTM screen
where the DTM layers are selected.
%RXQGDU\ : opens the Choose Polyline screen where a
polyline can be selected that defines the boundary of the
DTM.
Exclude points… : will move any points that exist
outside the selected boundary to the Auxiliary layer. If a
point is later stored outside the boundary, they will also
be moved to the Auxiliary layer.
Discard the boundary… : will initially move any points
that exist outside the boundary to the Auxiliary layer. If
a point is later stored outside the boundary, the selected
boundary is automatically unselected.
&OHDU : will unselect the selected boundary and move it to the
Auxiliary layer.