Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual - Manual (Page 97)

Survey Menu
R-91
Vertical Angle Offset
6XUYH\ 9HUWLFDO $QJOH 2IIVHW or , Offset Shot – V Angle
The Vertical Angle Offset screen allows you to compute and store the
location of a new point that exists directly above or below the rod
location, but cannot be occupied, such as the top of a utility pole.
The new point will have the same coordinates as the rod location, but
with a different elevation.
Foresight : is the point name that will be used when
storing the new point.
Description : is the description for the offset shot that is
stored.
6KRRW 3ULVP : will take a shot to the prism.
$LP =HQLWK : will read the vertical angle measured by the
total station, which should be facing the new point’s
location.
%DFNVLJKW« : accesses the Backsight Setup screen (Page
R-78).
Settings : located at the top of the screen, is a shortcut to
the Surveying Settings screen (Page R-34).