beautypg.com

Traverse adjust – Spectra Precision Survey Pro v3.80 Recon iPAQ Reference Manual User Manual

Page 243

background image

Adjust Menu

R-237

Rotate

: is the angle to rotate the selected points around the

Rotation

point

.

2OG $]LPXWK / 2OG %HDULQJ : is a known direction between any two

points in the current job before they are rotated.

1HZ $]LPXWK

/

1HZ %HDULQJ : is the direction between the same

two points specified above after the rotation.

6ROYH : will perform the rotation on the selected points and change

the coordinates accordingly.

Traverse Adjust

$GMXVW 7UDYHUVH $GMXVW

The Traverse Adjust wizard is a series of screens that allow you to
adjust a closed traverse for angular error and/or perform a compass
rule adjustment on a closed or open traverse.

Choose Your Traverse

: is used to select a traverse to

adjust from the following options:

7DS 3RO\OLQH« : is used to tap an existing polyline

from a map view.

7R)URP« : provides selection of points by point

name.

;

Angle Adjust

: When checked, will perform an angle

adjustment to the closed traverse. An angle adjustment
will apply the angular error equally among all of the
angles of the closed traverse and adjust the coordinates
for all but the first two traverse points. (The first leg of
the traverse is not adjusted.)

;

Compass Rule

: When checked, will perform a compass