Yokogawa Data Logging Software GA10 User Manual
Page 45
3-21
IM 04L65B01-01EN
Chapter 3 Configuring and Starting Data Collection and Recording
The following settings are available on the Record Setting Page.
The details of each are provided in the following pages.
• Recording Interval
• Record File Type
• Start/Stop Condition
• File Division
• Number of Files
• Folder
• File Name
• Comment
Note
• The data recording settings vary depending on whether the data collection condition was set to
PC time or Device time. Also, the handling of alarm information and the number of record data
files vary.
• If the server stops for some reason during recording, recording will resume when the server
recovers. However, if the server is stopped manually, or if the PC in which the server is installed
stops, the data file is cut at this point and saved. Recording will not resume even if the server is