Yokogawa Data Logging Software GA10 - Manual (Page 28)

3-4
IM 04L65B01-01EN
Note
You cannot perform the following operations while data is
being collected.
• Register devices from the Online Devices List to the
Devices List
• Register a new device on the Devices List
• Change device registration positions on the Devices
List
• Delete registered devices from the Devices List
• Change the settings of registered devices on the
Devices List
• Specify the record interval
3.3 Detailed Configuration (Detail
Settings)
In Detail Settings mode, you can customize data
collection, monitoring, and recording. This section
explains how to configure the settings in Detail Settings
mode before starting data collection.
3.3.1 Creating a Project
New
Create a new project in Detail Settings mode.
1
Start the client, and log in.
The Project List Page appears.
2
On the File menu, click Create New Project.
3
Type the project name and comment. Set Settings
Mode to
Detail Settings.
4
Click OK.
A new project is created in the Project List Page.
Exporting and Importing
You can export the information of a created project
to a file (.pjf extension).
This file is referred to as the project information
file. The procedure to export and import a project is
explained below.
Chapter 3 Configuring and Starting Data Collection and Recording