Yokogawa Value Series FX1000 - Manual (Page 89)

3-7
IM 04L21B01-17EN
Commands
1
2
3
4
5
6
App
Index
Basic Setting Commands
• To apply settings that you have changed using the basic setting commands, you need
to save the settings using the YE or XE command. Be sure to save the settings before
you change the execution mode from the basic setting mode to the operation mode.
Otherwise, the new settings will not be applied.
• The settings that are returned in response to a query in basic setting mode contain
the new settings even if they have not been saved. However, the new settings are
not applied unless they are saved. If the settings are cleared or if you change the
execution mode from basic setting mode to operation mode before saving the settings,
the settings that are returned in the response to a query contain the settings that were
in use before they were changed.
Note
• The settings that are changed using the YA, YK, RU, YQ, YS, YB, YD, WS, WW, and WQ
commands are applied after saving the new settings using the XE command and restarting
the FX.
• When you execute the YE or YO command, communication is disconnected. Commands
listed after the YO or YE command are ignored.
Command
Name
Function Execution Mode Administrator User Page
WU Sets the environment Basic setting mode Yes No 3-34
WO Sets alarm and DO settings Basic setting mode Yes No 3-36
WH Sets alarm hysteresis Basic setting mode Yes No 3-36
XV Sets the scan interval and A/D integration time Basic setting mode Yes No 3-37
XB Sets burnout detection Basic setting mode Yes No 3-37
XJ Sets RJC Basic setting mode Yes No 3-37
XM Sets the memory sampling condition Basic setting mode Yes No 3-37
RF Sets the key lock Basic setting mode Yes No 3-37
RN Sets basic login Basic setting mode Yes No 3-38
RP Sets user limitations Basic setting mode Yes No 3-38
RO Sets the type of report and when to create reports (/M1, /PM1, and
/PWR1 options)
Basic setting mode Yes No 3-38
RM Sets a report channel (/M1, /PM1, and /PWR1 options) Basic setting mode Yes No 3-39
XG Sets the time zone Basic setting mode Yes No 3-39
XN Sets the date format Basic setting mode Yes No 3-39
YB Sets host information (/C7 option) Basic setting mode Yes No 3-39
YD Sets network parameters (/C7 option) Basic setting mode Yes No 3-40
YA Sets the IP address, subnet mask, and default gateway (/C7 option) Basic setting mode Yes No 3-40
YK Sets keepalive (/C7 option) Basic setting mode Yes No 3-40
RU Sets DNS parameters (/C7 option) Basic setting mode Yes No 3-40
WS Sets a server (/C7 option) Basic setting mode Yes No 3-40
WW Sets web page parameters (/C7 option) Basic setting mode Yes No 3-40
YQ Sets the communication timeout (/C7 option) Basic setting mode Yes No 3-41
YT Sets the FTP transfer timing (/C7 option) Basic setting mode Yes No 3-41
YU Sets what kind of information to send using e-mail (/C7 option) Basic setting mode Yes No 3-41
YV Sets an e-mail recipient address (/C7 option) Basic setting mode Yes No 3-42
YW Sets the e-mail sender address (/C7 option) Basic setting mode Yes No 3-42
YX Sets the e-mail SMTP server name (/C7 option) Basic setting mode Yes No 3-42
YJ Sets the Modbus client’s destination server (/C7 option) Basic setting mode Yes No 3-42
YP Sets basic Modbus client settings (/C7 option) Basic setting mode Yes No 3-43
YR Sets the Modbus client’s transmit command (/C7 option) Basic setting mode Yes No 3-43
WB Sets SNTP client parameters (/C7 option) Basic setting mode Yes No 3-43
WC Sets the SNTP operation that is performed when memory start is
executed (/C7 option)
Basic setting mode Yes No 3-44
YS Sets the serial interface (/C2 and /C3 options) Basic setting mode Yes No 3-44
YL Sets the operation of the Modbus master function (/C2 and /C3
options)
Basic setting mode Yes No 3-44
3.2 List of Commands