Yokogawa Value Series FX1000 - Manual (Page 27)

1-19
IM 04L21B01-17EN
Using the Ethernet Interface (/C7 Option)
1
2
3
4
5
6
App
Index
• Include source URL
Select On to attach the source URL. Attach the URL when the Web server is enabled.
• Subject
Enter the subject of the e-mail using up to 32 alphanumeric characters. The default
setting is Alarm_summary.
• Header1 and Header2
Enter header 1 and header 2 using up to 64 characters.
Scheduled Settings
Specify the settings for sending e-mail at scheduled times.
• Recipient1 and Recipient2
Set the e-mail recipients. For Recipient1 and Recipient2, select On to send e-mail or
Off to not send e-mail.
• Interval
Select the interval for sending e-mail to Recipient1 and Recipient2 from 1, 2, 3, 4, 6, 8,
12, and 24 hours.
• Ref. time
Enter the time used as a reference for sending the e-mail at the specified interval to
Recipient1 and Recipient2.
• Include instantaneous value, Include source URL, Subject, and Header
These items are the same as the e-mail that is sent when an alarm occurs. The
default subject is Periodic_data.
System Settings
Specify the settings for sending e-mail when the FX recovers from a power failure, at
memory end, and when an error occurs.
• Recipient1 and Recipient2
Set the e-mail recipients. For Recipient1 and Recipient2, select On to send e-mail or
Off to not send e-mail.
• Include source URL, Subject, and Header
See the explanation of alarm e-mail. The default subject is System_warning.
Report Settings (/M1, /PM1, and /PWR1 options)
Specify the settings for sending e-mail when reports are created.
• Recipient1 and Recipient2
Set the recipients. For Recipient1 and Recipient2, select On to send e-mail or Off to
not send e-mail.
• Include source URL, Subject, and Header
See the explanation of alarm e-mail. The default subject is Report_data.
1.4 Sending E-mail Messages