Yokogawa Value Series FX1000 - Manual (Page 67)

2-3
IM 04L21B01-17EN
Using the Serial Communication Interface (/C2 and /C3 Options)
1
2
3
4
5
6
App
Index
2.2 Flow of Operation When Using the Serial
Interface
The following flow chart shows the procedure to follow to configure communications
using RS-232 or RS-422A/485.
The procedure varies for RS-232 and RS-422A/485.
Set the address
RS-232
RS-422A/485
Set the parity
Set the data length
Set the baud rate
Connect the cable
Setting the
handshaking
Communication
type
Set the Modbus
master
Set the protocol
Configuration required when Modbus master
is selected in the protocol setting.
Start of setting
End of setting