Yokogawa Value Series FX1000 - Manual (Page 116)

3-34
IM 04L21B01-17EN
3.6 Basic Setting Commands
WU Sets the environment
Setups GENERAL, BATCH, DISPLAY, MESSAGE,
INPUT, ALARM, SECURITY, MEDIA, MATH,
REPORT, SERVICEPORT, DECIMALPOINT,
POP3, and FTPSERVER
General environment settings
Syntax WU p1,p2,p3
p1 Setting type (GENERAL)
p2 Selects tag or channel number
TAG Tag
CHANNEL Channel number
p3 Language
ENGLISH
JAPANESE
CHINESE
GERMAN
FRENCH
ITALIAN
SPANISH
PORTUGUESE
RUSSIAN
KOREAN
Batch settings
Syntax WU p1,p2,p3,p4
p1 Setting type (BATCH)
p2 Batch function (OFF, ON)
OFF Disables the batch function
ON Enables the batch function
p3 Number of lot number digits (OFF, 4, 6, 8)
p4 Auto increment (ON, OFF)
Description Parameters p3 and p4 are valid when p2 is set to
ON.
Display settings
Syntax WU p1,p2,p3,p4
p1 Setting type (DISPLAY)
p2 Trend type
T-Y T-Y display
p3 Partial expanded display (OFF, ON)
p4 Trend interval switching (OFF, ON)
Message settings
Syntax WU p1,p2,p3,p4
p1 Setting type (MESSAGE)
p2 Where to write messages that you enter
using keys
COMMON All display groups
SEPARATE The display group that you
specify
p3 Power failure message (OFF, ON)
p4 Change message (OFF, ON)
Input settings
Syntax WU p1,p2
p1 Setting type (INPUT)
p2 How to detect values that exceed the scale
FREE When the measuring range is
exceeded
OVER When ±105% of the scale is
exceeded
Description The setting of parameter p2 (how to detect
values that exceed the scale) is not applied to
channels that are set to Log scale (/LG1 option).
Alarm settings
Syntax WU p1,p2
p1 Setting type (ALARM)
p2 Alarm suppression function (OFF, ON)
Security settings
Syntax WU p1,p2,p3
p1 Setting type (SECURITY)
p2 Key
OFF Disables the security features
KEYLOCK Locks the keys
LOGIN Enables the login function
p3 Communication
OFF Disables the security features
LOGIN Enables the login function
Description On models that do not have the Ethernet
interface (/C7 option), p3 is fixed to OFF.
Media settings
Syntax WU p1,p2,p3
p1 Setting type (MEDIA)
p2 Automatic saving (OFF, ON)
p3 Media FIFO (OFF, ON)
Example Use media FIFO.
WUMEDIA,ON,ON
Description • Parameter p3 is valid when p2 is set to ON.
• You cannot use this command on models that
do not have a CF card slot.
3.6 Basic Setting Commands