Yokogawa Value Series FX1000 - Manual (Page 124)

3-42
IM 04L21B01-17EN
When you want to send system notifications
Syntax YU p1,p2,p3,p4,p5,p6,p7
p1 Information to send (SYSTEM)
p2 Recipient 1 (ON, OFF)
p3 Recipient 2 (ON, OFF)
p4 Inclusion of the source URL (ON, OFF)
p5 Subject (up to 32 characters)
p6 Header 1(up to 64 characters)
p7 Header 2(up to 64 characters)
Query YU[p1]?
Example Send system notification e-mails that include
the source URL to recipient 1. Set the subject to
“SystemAlert” and header 1 to “LP2.”
YUSYSTEM,ON,OFF,ON,SystemAlert,LP2
When you want to send report generation
notifications
Syntax YU p1,p2,p3,p4,p5,p6,p7
p1 Information to send (REPORT)
p2 Recipient 1 (ON, OFF)
p3 Recipient 2 (ON, OFF)
p4 Inclusion of the source URL (ON, OFF)
p5 Subject (up to 32 characters)
p6 Header 1(up to 64 characters)
p7 Header 2(up to 64 characters)
Query YU[p1]?
Example Send report generation notification e-mails that
include the source URL to recipient 1. Set the
subject to “Report” and header 1 to “LP2.”
YUREPORT,ON,OFF,ON,Report,LP2
Description • For details about system notifications, see
section 1.4.
• You can use report generation notification on
models with the /M1, /PM1, or /PWR1 math
option.
• For details on e-mail settings, see section 1.4.
YV Sets an e-mail recipient address
(/C7 option)
Syntax YV p1,p2
p1 Selects the recipient
1 Recipient 1
2 Recipient 2
p2 Recipient address (up to 150 characters)
Query YV[p1]?
Example Set recipient 1 to “[email protected]” and
“[email protected].”
YV1,[email protected] fxuser2@
fx1000.com
Description • To specify multiple recipients, separate each
recipient with a space.
• For details on e-mail settings, see section 1.4.
YW Sets the e-mail sender address
(/C7 option)
Syntax YW p1
p1 Sender address (up to 64 characters)
Query YW?
Example Set the sender address to “fxadv.”
YWfxadv
Description For details on e-mail settings, see section 1.4.
YX Sets the e-mail SMTP server
name (/C7 option)
Syntax YX p1,p2,p3
p1 SMTP server name (up to 64 characters)
p2 Port number (0 to 65535)
p3 Authentication (OFF, POPBEFORESMTP,
AUTH)
OFF
Authentication is not
used
POPBEFORESMTP POP before SMTP is
used
AUTH SMTP authentication
is used
Query YX?
Example Set the SMTP server to “smtp.recorder.com” and
the port to 25. Use POP3 authentication.
YXsmtp.recorder.com,25,POPBEFORESMTP
Description For details on e-mail settings, see section 1.4.
YJ Sets the Modbus client’s
destination server (/C7 option)
Syntax YJ p1,p2,p3,p4,p5
p1 Server number (1 to 16)
p2 Port number (0 to 65535)
p3 Host name (up to 64 characters)
p4 Unit number registration
AUTO Do not use the unit number
FIXED Use a fixed unit number
p5 Unit number (0 to 255)
Query YJ[p1]?
Example For server number 3, set the port number to
502, the host name to “fx1000,” the unit number
registration to FIXED, and the unit number to
127.
YJ3,502,fx1000,FIXED,127
3.6 Basic Setting Commands