Yokogawa Value Series FX1000 - Manual (Page 43)

1-35
IM 04L21B01-17EN
Using the Ethernet Interface (/C7 Option)
1
2
3
4
5
6
App
Index
When Not Using the Login Function
You can connect to the server using the user name “admin,” “user,” or “anonymous.” You
can use a PC to access the FX via FTP. You can perform operations such as retrieving
directory and file lists from the external storage medium of the FX and transferring and
deleting files. In addition, you can also retrieve the directory or file list and transfer files in
the internal memory.
Using a Web Browser to Access the FX
An example of retrieving files using a browser is described below. In the Address box,
enter the following:
ftp://host name.domain name/file name
Drag the data you want to retrieve from the /MEMO/DATA0 folder in the case of internal
memory data or the /DRV0 folder in the case of data on the external storage medium to
the PC. You can also use the IP address in place of the “host name.domain name.”
When Using the Login Function
You will be prompted for a user name and password when you access the server. Enter
a user name and password that are registered on the FX to connect to it. For information
about the operations that can be executed, see the “Login” explanation in section 1.1.
Port Number
The default value is 21. To change the setting,
◊ Press
MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Environment tab > Communication > Service port
For the selectable range of port numbers, see section 6.1.
1.6 Accessing the Measurement Data File on the FX from a PC