Yokogawa Value Series FX1000 - Manual (Page 36)

1-28
IM 04L21B01-17EN
Page Type
• Monitor
Configure the monitor page. You can carry out the following operations on the monitor
page.
• Display the alarm summary
• Display the measured and computed values of all channels
• Display logs (message summary, error log, etc.)
For screen examples, see “Monitoring with a Browser” in this section.
• Operator
Set the operator page. The following operations can be carried out in addition to the
functions available on the monitor page.
• Switch the operation screen
• Control the FX’s DISP/ENTER key and arrow keys
• Write messages
For screen examples, see “Monitoring with a Browser” in this section.
Setting the monitor page
• Page type
Select
Monitor.
• Setting On/Off
To display the monitor page on a browser, select
On; otherwise, select Off.
• Access control
To use access control, select
Admin (for an administrator) or User.
You must enter a user name and password to display the monitor page. Set the user
name and password through the Login item. For details, see the FX1000 User’s
Manual, IM 04L21B01-01EN.
Setting the operator page
• Page type
Select
Operator.
• On/Off
To display the operator page in the browser, select
On. Otherwise, select Off.
• Access control
To use access control, select
Admin (for an administrator). You must enter a user
name and password to display the operator page. Set the user name and password
through the
Login item. See the FX1000 User’s Manual, IM 04L21B01-01EN.
• Command input
To use message write commands, select
On. Otherwise, select Off.
1.5 Monitoring the FX on a PC Browser