Yokogawa Value Series FX1000 - Manual (Page 44)

1-36
IM 04L21B01-17EN
1.7 Transferring Measurement Data Files and
Other Files from the FX
The display and event data files, report data files, and snapshot data files created in the
internal memory of the FX can be automatically transferred using FTP at the time the
files are created.
Files to Be Transferred via FTP
The display, event, and report data files are transferred automatically to the FTP
destination at appropriate times.
File Type Description
Display data file Data files are automatically transferred at each file save interval.
Event data file Files are automatically transferred when the data length of data is
recorded.
Report data file Data files are automatically transferred when a report file is closed (or
divided). For example, data files are transferred once per month when
generating only daily reports.
Snapshot data file The files are automatically transferred when a snapshot 1 is executed.
1: Indicates a snapshot taken using the FUNC key, communication
command (EV2 command), USER key, or remote control function.
Setting the FTP Client
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Menu tab > Communication (Ethernet) > FTP client >
FTP transfer file or FTP connection.
FTP transfer file settings FTP connection settings
Setting the FTP transfer files
• Display and Event Data
Select On when automatically transferring display and event data files.
• Report
Select On when automatically transferring report data files.
• Snapshot
Select On when automatically transferring snapshot data files.