Yokogawa Value Series FX1000 - Manual (Page 13)

1-5
IM 04L21B01-17EN
Using the Ethernet Interface (/C7 Option)
1
2
3
4
5
6
App
Index
FTP Client
Automatic transferring of files
• The display data, event data, report data (/M1, /PM1, and /PWR1 options), and
snapshot data files that are created in the internal memory of the FX can be
automatically transferred to an FTP server. The result of the transfer is recorded in the
FTP log. The FTP log can be shown on the FX’s display (see “Log Display” described
later) or output to a PC using commands.
FX
Data file
FTP server
Primary Secondary
Ethernet
Transfer destination
(FTP server) information
Transfer log
(FTP log)
Data file to be
transferred FTP client
You can specify two destination FTP servers, primary and secondary. If the primary
server is down, the file is transferred to the secondary server.
• For a description of the settings required to use this function, see section 1.7.
FTP test
• You can test whether files can be transferred by transferring a test file from the FX to
an FTP server.
• The result of the FTP test can be confirmed on the FTP log display.
• For the procedure to use this function, see section 1.7.
Maintenance/Test Server
• This function can be used to output connection information, network information, and
other information regarding Ethernet communications.
• The commands that can be used with this function are maintenance/test commands
(see section 3.11).
Instrument Information Server
• This function can be used to output the serial number, model name, and other
information about the FX connected via the Ethernet network.
• The commands that can be used with this function are instrument information output
commands (see section 3.12).
1.1 What You Can Do with the FX1000