Yokogawa Value Series FX1000 - Manual (Page 122)

3-40
IM 04L21B01-17EN
YD Sets network parameters (/C7
option)
When you are not retrieving network parameters
automatically
Syntax YD p1
p1 Automatic retrieval (NOT)
When you are retrieving network parameters
automatically
Syntax YD p1,p2,p3
p1 Automatic retrieval (USE)
p2 DNS information retrieval (USE, NOT)
p3 Automatic host name registration (USE,
NOT)
Query YD?
Example Set the FX to automatically retrieve the IP
address and DNS information and automatically
register the host name.
YDUSE,USE,USE
YA Sets the IP address, subnet
mask, and default gateway (/C7
option)
Syntax YA p1,p2,p3
p1 IP address (0.0.0.0 to 255.255.255.255)
p2 Subnet mask
(0.0.0.0 to 255.255.255.255)
p3 Default gateway
(0.0.0.0 to 255.255.255.255)
Query YA?
Example Set the IP address to 192.168.111.24, the subnet
mask to 255.255.255.0, and the default gateway
to 0.0.0.0.
YA192.168.111.24,255.255.255.0,0.0.0.0
YK Sets keepalive (/C7 option)
Syntax YK p1
p1 Keepalive (ON, OFF)
Query YK?
Example Disable keepalive.
YKOFF
RU Sets DNS parameters (/C7
option)
Server settings
Syntax RU p1,p2,p3
p1 Setting type (SERVER)
p2 Primary DNS server address
(0.0.0.0 to 255.255.255.255)
p3 Secondary DNS server address
(0.0.0.0 to 255.255.255.255)
Suffix settings
Syntax RU p1,p2,p3
p1 Setting type (SUFFIX)
p2 Domain suffix 1 (up to 64 characters)
p3 Domain suffix 2 (up to 64 characters)
Query RU[p1]?
Example Set domain suffix 1 to “rec1.recorder.com” and
domain suffix 2 to “rec2.recorder.com.”
RUSUFFIX,rec1.recorder.com,rec2.
recorder.com
WS Sets a server (/C7 option)
Syntax WS p1,p2
p1 Server type (FTP, WEB, MODBUS, SNTP)
p2 Server usage (USE, NOT)
Query WS[p1]?
Example Enable the Web server.
WSWEB,USE
WW Sets web page parameters (/C7
option)
Syntax WW p1,p2,p3,p4
p1 Web page type
OPERATOR Operator page
MONITOR Monitor page
p2 Web page (ON, OFF)
p3 Authentication
OFF No authentication
ADMIN Administrator privileges
USER
User privileges
p4 Command input (USE, NOT)
Query WW[p1]?
Example Enable the operator page, disable authentication,
and enable command input.
WWOPERATOR,USE,OFF,USE
Description • Parameters p3 and p4 are valid when p2 is set
to ON.
• You can set parameter p3 to OFF or ADMIN
when p1 is set to OPERATOR.
• Parameter p4 is valid when p1 is set to
OPERATOR.
3.6 Basic Setting Commands