Yokogawa Value Series FX1000 - Manual (Page 100)

3-18
3.4 Setting Commands
IM 04L21B01-17EN
ST Sets a tag
Syntax ST p1,p2
p1 Measurement or computation channel
number
p2 Tag (up to 16 characters)
Query ST[p1]?
Example Set the channel 002 tag to TAG2.
ST002,TAG2
Description • For the characters that you can use for tags,
see appendix 3, “ASCII Character Codes.”
Note that you cannot use semicolons or
commas.
• You can specify computation channels
(including in queries) on models with the /M1,
/PM1, or /PWR1 math option.
SX Sets a display group
Syntax SX p1,p2,p3,p4
p1 Display group number
p2 Enable or disable (ON, OFF)
p3 Display group name (up to 16 characters)
p4 Channel configuration
Query SX[p1]?
Example Assign channels 001, 003, and 004 to 006 to
group number 1 and name the group GROUP2.
SX1,ON,GROUP2,001.003.004-006
Assign channels by using periods to separate
each channel and hyphens to specify ranges of
channels.
Description • For the characters that you can use for group
names, see appendix 3, “ASCII Character
Codes.” Note that you cannot use semicolons
or commas.
• Set p1 by referring to the table in section 3.3.
SL Sets a trip line
Syntax SL p1,p2,p3,p4,p5,p6
p1 Display group number
p2 Trip line number (1 to 4)
p3 Trip line display (ON, OFF)
p4 Display position (0 to 100) as a percentage
p5 Display color (RED, GREEN, BLUE,
B.VIOLET, BROWN, ORANGE,
Y.GREEN, LIGHTBLUE, VIOLET, GRAY,
LIME, CYAN, DARKBLUE, YELLOW,
LIGHTGRAY, PURPLE, BLACK, PINK,
L.BROWN, L.GREEN, DARKGRAY, OLIVE,
DARKCYAN, S.GREEN)
p6 Line width (1, 2, 3)
Query SL[p1[,p2]]?
Example Display trip line 1 in red at the 10% position of
group 1. Set the line width to 1.
SL1,1,ON,10,RED,1
Description • Set the boundary positions as percentages
of the entire amplitude axis in the waveform
display area.
• Set p1 by referring to the table in section 3.3.
SG Sets a message
Syntax SG p1,p2
p1 Message number (1 to 100)
p2 Message (up to 32 characters)
Query SG[p1]?
Example Assign character string “MESSAGE1” to
message number 2.
SG2,MESSAGE1
Description For the characters that you can use for
messages, see appendix 3, “ASCII Character
Codes.” Note that you cannot use semicolons or
commas.
TH Sets the directory on the external
storage medium for saving data
Syntax TH p1
p1 Directory name (up to 20 characters)
Query TH?
Example Select the DATA1 folder on the external storage
medium for saving data.
THDATA1
Description You cannot use this command on models that do
not have a CF card slot or USB interface (/USB1
option).
TZ Sets a file header
Syntax TZ p1,p2
p1 Fixed to 1
p2 File header (up to 50 characters)
Query TZ[p1]?
Example Set the header to “FX1000DATA.”
TZ1,FX1000DATA