Ambient temperature, Factory use only, Inputs 1 and 2 module types – Watlow Series 982 User Manual
Page 90: Acnt] [`gnd] [cnt1] [cnt2] [ity1] [ity2] [amb, Factory-diagnostics
6.4
WATLOW Series 982 User’s Manual
Factory Menus, Chapter 6
Factory-Diagnostics
Ambient Temperature
Shows the ambient temperature at the Input 1 terminals.
The temper-
ature is shown in °F in the form [00)0] regardless of the settings of
[deC1], [`dfL] or [`C_F].
[AMb] This prompt always appears.
Factory Use Only
These prompts are used only at the factory.
[Acnt] [`gnd] [cnt1] [cnt2] These prompts always appear.
Inputs 1 and 2 Module Types
Displays which input module is installed in the controller.
Please doc-
ument this value before contacting the factory for technical assistance.
Input Types
• [none] No input module
• [``tc] Thermocouple only module
• [Curr] Current detect
• [SLid] Slidewire module
• [UOFF] Universal off
• [Urtd] Universal rtd
• [Utch] Universal high-gain thermocouple
• [UtcL] Universal low-gain thermocouple
• [UMu] Universal millivolts
• [UPrc] Universal process
• [`Ei2] Event input 2
[ity1] [ity2] These prompts always appear.
[acnt]
[`gnd]
[cnt1]
[cnt2]
[ity1]
[ity2]
[AMB]