Declaration of conformity, Watlow winona, inc – Watlow Series 982 User Manual
Page 140
Declaration of Conformity
Series 981, 982, 983, 984
Watlow Winona, Inc.
1241 Bundy Blvd.
Winona, MN 55987 USA
Declares that the following product:
Designation:
Series 981, 982, 983 or 984
Model Numbers:
98 (1, 2, 3 or 4) (Any letter) – (1 or 2) (0, 3 or 5) (B, C, D, E, F or K)
(A, B, C, D, E, F, K or T) – (A, B, C, J, K, M, N or T)
(A, B, C, D, E, K, R, S, T or U) (Any two letters)
Classification:
Temperature control, Installation Category II, Pollution degree 2,
continuous unmonitored operation.
Rated Voltage:
100 to 240 V~ (ac) or 24 to 28 V (ac or dc)
Rated Frequency:
50 or 60 Hz
Rated Power:
16 VA maximum
Meets the essential requirements of the following European Union Directives by using the relevant
standards show below to indicate compliance.
89/336/EEC Electromagnetic Compatibility Directive
EN 61326:1997 +A1, A2
Electrical equipment for measurement, control and laboratory use –
EMC requirements (Industrial Immunity, Group 1 Class A* Emissions).
EN 61000-4-2:1996 +A1
Electrostatic Discharge Immunity
EN 61000-4-3:1997
Radiated Field Immunity
EN 61000-4-4:1995
Electrical Fast-Transient / Burst Immunity
EN 61000-4-5:1995 +A1
Surge Immunity
EN 61000-4-6:1996
Conducted Immunity
EN 61000-4-11:1994
Voltage Dips, Short Interruptions and Voltage Variations
EN 61000-3-2:2000
Harmonic Current Emissions
EN 61000-3-3:1995 +A1
Voltage Fluctuations and Flicker
*NOTE: Not appropriate for use in commercial or residential applications, may cause interference with
nearby radio frequency reception.
73/23/EEC Low-Voltage Directive
EN 61010-1:2001
Safety Requirements of electrical equipment for measurement, control
and laboratory use. Part 1: General requirements
Raymond D. Feller III
Winona, Minnesota, USA
Name of Authorized Representative
Place of Issue
General Manager
May 2005
Title of Authorized Representative
Date of Issue
Signature of Authorized Representative