Watlow Series 982 - Manual (Page 89)

Factory-Diagnostics
WATLOW Series 982 User’s Manual 6.3 Factory Menus, Chapter 6
Factory Ship Date
Shows the date that the final factory control test was performed. The
first two digits represent the week as numbered from [01--] to [52--].
The second two digits represent the year [--94], [--95], etc…
[dAtE] This prompt always appears.
Software Revision
Shows the controller’s software revision code. This letter should match
the software revision code on the cover of the manual that came with your
controller; [```L] and W982-XUMN Rev L00.
[SOFt] This prompt always appears.
Serial Number
Shows the controller’s serial number. The first two letters in the upper
display are to indicate that the controller is in serial number mode. The
right half of the upper display shows the first two digits of the serial num-
ber. The lower display shows the last four digits of the serial number.
[Sn34]
[5678]
This is what the controller with the serial number 0982345678 would dis-
play.
[Sn--] This prompt always appears.
[DAte]
[sOft]
[Sn--]