Alarm 3, Setup-output – Watlow Series 982 User Manual

Page 45

Text mode
Original mode

WATLOW Series 982 User’s Manual

4.19

Setup Menus, Chapter 4

Setup-Output

Alarm 3

Select the alarm type for alarm 3.
• [`Pr1] uses the process signal from input 1.

• [`dE1] uses a deviation from the input 1 signal.

• [rAtE] uses the rate of change at input 1 in degrees per minute.

[`AL3] This prompt appears only on controllers equipped with output 3
hardware for a relay (98__-____-B___, 98__-____-J___ or 98__-____-K___) or
switched dc (98__-____-C___), and with [`Ot3] set to [`AL3] or [AL3n].

Default

↓

[`Pr1]

[`de1]

[rAtE]

[`AL3]

This manual is related to the following products:

Series 981