beautypg.com

Output prompts, Output 1, 13 output prompts – Watlow Series 982 User Manual

Page 39: Setup-output

background image

WATLOW Series 982 User’s Manual

4.13

Setup Menus, Chapter 4

Setup-Output

Output Prompts

When you are in the Setup menus, the Series 982 displays the menu
selection ( [InPt], [OtPt], [GLbL] or [COM] ) in the upper display, and
[`SEt] in the lower display.

The Up-arrow > or Down-arrow key < selects another menu. Press the
Mode key µ to display the first prompt in the lower display and its value
in the upper display. Use the Up-arrow > and Down-arrow < keys to
change the value in the upper display. The new value will not take effect
until after a five-second delay or until you press the Mode key µ.

Output 1

Set the way that output 1 will respond to a difference between the set
point and an input variable.

• [``Ht] select reverse action, so that output 1 responds when the input

signal is less than the set point.

• [``CL] select direct action, so that output 1 responds when the input

signal is more than the set point.

[`Ot1] This prompt always appears.

Default

[``Ht]

[``CL]

[`Ot1]

[`Ot1]

˜

NOTE:
Decimal points may
not always be in the
position specified
below depending
on the the settings
in the Decimal 1
[deC1] parameters
in the Input Menu.

[`Ot1]

This manual is related to the following products: