Signals property settings, Cursors, Operator’s manual – Teledyne LeCroy ArbStudio User Manual

Page 85

Text mode
Original mode

Operator’s Manual

922244-00 Rev A

Signals Property Settings

Change signal properties by clicking the Signals Property button. The Signal
Property screen is shown.

Here you can change single signal colorings, the bus value display format,
transition modes, the space between, and the height of all signals.

NOTE: The minimum All Signals Height value is 20.

Cursors

Cursors (also called markers) are useful to identify and enlighten data for
improved organization and viewing. You can also use cursors to measure
and analyze acquired data.

Clicking the Markers button on the Digital Waveform Editor toolbar shows
or hides the marker window.