beautypg.com

Creating an amplitude modulated waveform, Operator’s manual – Teledyne LeCroy ArbStudio User Manual

Page 163

background image

Operator’s Manual

922244-00 Rev A

155

B

Creating an Amplitude Modulated Waveform

To create your first Amplitude Modulated Waveform, you must first create
a workspace with Arbitrary Waveform Generator as the Operating Mode
and at least one Analog Channel. See steps 5 and 6 in Arbitrary Waveform
Generator Setup Example
(on page 27) for details. If you already have a
workspace open, be sure it meets the aforementioned requirements
before proceeding with the following steps:

1. Double-click the Waveform Sequencer under Channel 1 (Arbitrary)

on the Device Control Tree. (Channel 1 can be any Analog channel
you have configured under Arbitrary Waveform Generator operating
mode in your workspace.)

The Waveform Sequencer is then shown.

2. Press the Add Standard Waveform button.