Teledyne LeCroy ArbStudio - Manual (Page 30)

ArbStudio
22 922244-00 Rev A

Waveform Sequencer - This tool, available only in the
Arbitrary mode, allows you to edit the waveforms loaded in
the channel and to select generation order and number of
repetitions. The waveforms generated by this tool are
considered as carrier signals if the modulation is needed.

Modulation Editor - This tool allows editing a modulating
waveform. The signal edited can modulate the waveform
edited by the Waveform Editor tool, with a M-ASK, M-FSK or
M-PSK modulation law.

Amplitude Profile Editor - This tool, available only in DDS
mode, allows setting the amplitude profile of the modulated
signal as a function of the frequency.

Carrier Editor - This tool, available only in DDS mode, allows
editing the carrier waveform of the modulated signal.
5. Editing Area Tag - These tags conserve screen space by toggling the
display of your open waveforms.
6. Device Status Tree - Lists various channel/pod instrument properties
such as sampling rate, channel type, and voltage level.

Type - Shows the channel functionality (Arbitrary, DDS, Digital
Pattern).

Waveform - In Arbitrary mode, it shows the current
waveform generated by the instrument.

Modulating - In DDS mode, it shows the phase or the
frequency of the modulating signal.

Voltage Level - Displays the Pod voltage level.

Sample Rate - The Sample rate of the Digital Pattern
Generator.