Teledyne LeCroy ArbStudio - Manual (Page 185)

Operator’s Manual
922244-00 Rev A 177
B
Repeat steps 3 - 5 and create Bus/Signals for WR and RD, associating
them with Ch1 and Ch2, respectively.
6. Now, provide a name for the Data Bus. in the Bus or Signal Name
field, click the Add bus or signal button, select Ch3 - Ch10, and then
click the Add signals to bus button.
7. Double-click the Pod A (Pattern) Waveform Sequencer
8. The Waveform Sequencer is then shown.