Teledyne LeCroy ArbStudio - Manual (Page 184)

ArbStudio
176 922244-00 Rev A
3. Provide a Name in the Bus or Signal Name field. Let's use the name
CLK. With the name provided, click the Add bus or signal button.
4. Your new Bus/Signal name is then shown in the Signals list on the
left.
5. Now, let's associate our added Bus/Signal (CLK) with a pod Channel
(Ch0) by selecting Ch0 on the channel list on the right, and then
clicking the Change Selected Pod button.
Our added Bus/Signal (CLK) is now shown as mapped to Ch0.