Teledyne LeCroy ArbStudio - Manual (Page 11)

Operator’s Manual
922244-00 Rev A 3
B
Safety Instructions
This section contains instructions that must be observed to keep the
instrument operating in a correct and safe condition. You are required to
follow generally accepted safety procedures in addition to the precautions
specified in this section. The overall safety of any system incorporating
this instrument is the responsibility of the assembler of the system.
Symbols
These symbols appear on the instrument's front or rear panels and in its
documentation to alert you to important safety considerations.
CAUTION of damage to instrument, or WARNING of hazard to
health. Attend to the accompanying information to protect
against personal injury or damage. Do not proceed until
conditions are fully understood and met.
WARNING. Risk of electro-shock.
Measurement ground connection.
Safety (protective) ground connection.
Alternating Current.
Precautions

Use proper power cord. Use only the power cord shipped with this
instrument and certified for the country of use.

Maintain ground. This product is grounded through the power cord
grounding conductor. To avoid electric shock, connect the external
AC adapter only to a grounded mating outlet.

Connect and disconnect properly. Do not connect/disconnect
probes or test leads while they are connected to a voltage source.