Teledyne LeCroy ArbStudio - Manual (Page 71)

Operator’s Manual
922244-00 Rev A 63
B
Segment Editing
Segments, the building blocks of waveforms, are composed by a specific
combination of components with the same length. Editing a segment
requires the following Component Definition settings:

Setting the segment length as either time duration or number of
samples.

Adding a component by right clicking on the corresponding
segment.

Setting the component function (Add, Multiply,…) with respect to
the segment.

Set the component type (Sine, Cosine, Triangle,…).

Set the component characteristics (Amplitude, Frequency, Phase,…).
Component Operation Field
The component operation field provides mathematical operators for
applying to the current component and others present in a segment.
Operators include Add, Sub, Multiply, and Divide. The operation is
performed on each data point in a component and on each component in a
segment. This example edits a rectangular waveform (amplitude 5V,