Teledyne LeCroy ArbStudio - Manual (Page 82)

ArbStudio
74 922244-00 Rev A
PLEASE NOTE THE FOLLOWING:

All trigger modes (except the Burst trigger mode), any waveform
inserted in the generation sequence may be repeated an arbitrary
number of times (with an upper limit imposed by the hardware
capabilities of 8,589,934,592 number of repetitions).

Each waveform present in the Available Waveform section can be
inserted in the Generation Sequence an arbitrary number of times
and in any order.

Waveforms present in the Available Waveform list may not be
inserted in the Generation Sequence. These waveforms are loaded
in ArbStudio memory, but they are not generated.
The following commands are provide for sequence edit:

Load Sequencer - Loads a selected sequencer generation list.

Save - Saves the current sequencer generation list.

Edit - Edits the duration and repetitions of the selected waveform in
the sequencer generation list.

Add - Adds the selected Project waveforms to the Sequencer.

Add All - Adds all Project waveforms to the Sequencer.

Remove All - Removes all waveforms from the Sequencer
generation list.