Teledyne LeCroy ArbStudio User Manual
Page 119

Operator’s Manual
922244-00 Rev A
111
B
D
IGITAL
W
AVEFORM
C
OMMANDS
Buttons atop the Waveform and Operation List Tabs provide the following
digital waveform functions, respectively:
Import Waveforms - The import file must be encoded using the CSV
(Comma Separated Values) format. Each line in the CSV file
corresponds to a row in the table and within a line. Fields are
separated by commas and each field belongs to one table column.
The first row contains the pod index with the prefix character #, for
example #1 stands for Pod 1.
PLEASE NOTE THE FOLLOWING:
#17 is the Write Ram signal, #16 is the Extended Trigger IN
signal.
The next imported rows contain the pod values. Only values
0,1,2 are allowed. 0 is the low logical level, 1 is the high logical
level and 2 is the high impedance state (HiZ).
The imported data is shown on the Waveform Graph and on
the Waveform grid. However, only data corresponding to
bus/signals added on the waveform selected from the
Waveform List is imported.
Instrument settings cannot be imported. So imported data is
shown with the current user settings.
Export Waveforms - The file is encoded using the CSV (Comma
Separated Values) format, each line in the CSV file corresponds to a
row in the table and within a line, fields are separated by commas,
each field belonging to one table column. The first exported row
contains the pod index with the prefix character #, for example #1
stands for Pod 1.
PLEASE NOTE THE FOLLOWING:
#17 is the Write Ram signal, #16 is the Extended Trigger IN
signal.
The next exported rows contain the pod values. Only values
0,1,2 are allowed. 0 is the low logical level, 1 is the high logical
level and 2 is the high impedance state (HiZ).