Teledyne LeCroy ArbStudio - Manual (Page 45)

Operator’s Manual
922244-00 Rev A 37
B

After the generation of the last waveform, ArbStudio starts again
with the first waveform, and then continues.

The sequence can be interrupted at any time by a Force Stop
command.
Stepped
A Force Trigger command activates the generation of the first waveform
present in the generation sequence.
This waveform is repeated for a number of times indicated in the repetition
number.

The instrument output maintains the value imposed by the last
sample of the generated waveform.

A new Force Trigger command activates the generation of
subsequent waveforms.

After the generation of the last waveform, a new Force Trigger
command activates again the generation of the first waveform.

The generation can be interrupted at any time by a Force Stop
command.
Burst
In this mode the first Force Trigger command activates the first waveform
present in the Generation sequence.