Teledyne LeCroy ArbStudio - Manual (Page 155)

Operator’s Manual
922244-00 Rev A 147
B
1. Arbitrary Waveform Generator Setup Example (on page 27)
2. Creating a New Workspace (on page 24)
3. Opening an Existing Workspace (on page 26)
Creating Your First Analog Waveform
To create your first Analog Waveform, you must first create a workspace
with Arbitrary Waveform Generator as the Operating Mode and at least
one Analog Channel. See steps 5 and 6 in Arbitrary Waveform Generator
Setup Example (on page 27) for details. If you already have a workspace
open, be sure it meets the aforementioned requirements before
proceeding with the following steps:
1. Double-click the Waveform Sequencer under Channel 1 (Arbitrary)
on the Device Control Tree. (Channel 1 can be any Analog channel
you have configured under Arbitrary Waveform Generator operating
mode in your workspace.)
The Waveform Sequencer is then shown.
2. Press the Add Standard Waveform button.