Teledyne LeCroy ArbStudio - Manual (Page 40)

ArbStudio
32 922244-00 Rev A
Channel Settings
Overview
Use Settings to control the channel settings of the instrument. Access
Settings by double clicking on the desired Channel in the Device Control
Tree.
The Settings screen is divided into the following tabs:
1. The General Tab (on page 33)
2. The Run Mode Tab (Waveform Sequence) (on page 35)
3. The Run Mode Tab (Modulation) (on page 39)
4. The Trigger IN Tab (on page 40)
5. The Trigger OUT Tab (on page 42)