Teledyne LeCroy ArbStudio - Manual (Page 179)

Operator’s Manual
922244-00 Rev A 171
B
Importing a Waveform from an Oscilloscope
Import a Waveform from an Oscilloscope by first creating a workspace with
Arbitrary Waveform Generator as the Operating Mode and at least one
Arbitrary Channel. See steps 5 and 6 in Arbitrary Waveform Generator
Setup Example (on page 27) for details. If you already have a workspace
open, be sure it meets the aforementioned requirements before
proceeding with the following steps:
1. Double-click the Waveform Sequencer under Channel 1 (Arbitrary)
on the Device Control Tree. (Channel 1 can be any Analog channel
you have configured under Arbitrary Waveform Generator operating
mode in your workspace.)
The Waveform Sequencer is then shown.
2. Click the Import Waveform button.
3. The Import waveform pop-up screen is shown.