Teledyne LeCroy ArbStudio - Manual (Page 78)

ArbStudio
70 922244-00 Rev A
by means of the Whole Waveform or Range option in the Application Zone
section, respectively.
In the Range case, two vertical lines appear in the graph area to delimit the
waveform section where the noise is to be applied. The two vertical lines
can be moved by the user. Their position is shown in the same Application
Zone section.
N
OISE
S
PECIFICATIONS
This section allows setting all the noise characteristics.
Noise Type - Use this drop-down to select the noise type applied to the
waveform. Options include Gaussian, Uniform, and White. Depending on
the selected noise type, specific parameters (Standard Deviation or
Amplitude) are enabled together with the Scale Factor field, for
increasing/decreasing noise intensity.
Click the Confirm Data button and the noise options set are applied to the
waveform. A preview of the noise effects on the waveform is shown in the
graph area.
Remove a filter by clicking the current waveform and selecting None on the
Settings Tab.