Teledyne LeCroy ArbStudio - Manual (Page 124)

ArbStudio
116 922244-00 Rev A

Signal/bus to Arbitrary Value. Arbitrary Value allows overwriting a
node value over the selected waveform, waveform interval, or
across one or more nodes or groups.
Overwrite a node value using the following steps:
1. Select a node or a bus and click the Value button on the
Digital Editor toolbar. The Arbitrary Value dialog box appears.
2. In the Radix list, select the radix type.
3. Specify the new value you want overwritten in the Numeric or
named value box.
4. Click OK.

Clock Editor for selected signal.
The Clock feature can be used to automatically generate the clock
wave, rather than drawing each clock triggering pulse.
The start and end time of a clock signal can also be selected.