Teledyne LeCroy ArbStudio - Manual (Page 180)

ArbStudio
172 922244-00 Rev A
Labels A-E on this image correspond with the following descriptions:
A. Click the Browse button and locate your desired .trc (Teledyne
LeCroy oscilloscope file format) file for import. ArbStudio prompts
you to convert the file format from .trc to .txt.
B. The File parsed section then shows the first 100 samples of the
imported waveform.
C. If desired, Input file settings allow for Sample rate, Header lines to
remove, and Decimal separator changes to the imported file.
D. Use the Sample setting fields to adjust parameters and rules.
E. If the imported waveform has a sample rate greater then the
1102/1104 ARBStudio target sampling rate (250 MS/s), the
waveform points are re-sampled and shown on the Sampling
information fields.