Pattern settings - the trigger out tab – Teledyne LeCroy ArbStudio User Manual

Page 110

Text mode
Original mode

ArbStudio

102

922244-00 Rev A

Pattern Settings - The Trigger Out Tab

The following parameters are available on the tab:

RIGGER OUT SOURCE

You can select the trigger source that generates a Trigger Out event.

Multiple sources may be selected.

Signals that can be sent to the Trigger OUT output include Start, Stop,
Marker, Pod A Trigger IN, and BNC Trigger IN.

OLARITY

Choose Positive or Negative for the Trigger OUT signal polarity as desired.

ESTINATION

A logic combination of the Trigger Out event of the enabled channels is
always available on the dedicated BNC Connector and on Pod A/B Trigger
Out signals on the instrument front panel. For more information, see The
Trigger OUT Math Tab (on page 48).