Teledyne LeCroy ArbStudio - Manual (Page 64)

ArbStudio
56 922244-00 Rev A

Add Segment/Component - Same as the right click option, if a
waveform is selected, inserts a new segment with its first
component (Component1) in the last position. If a component or
segment is selected, inserts a new component in the last position.
Either way, the Edit Component window is shown after
segment/component creation.

Delete - Removes a component or a segment from the Waveform
Manager.
Available Waveforms from the Waveform Display
Project Waveforms - This tab contains a list of all standard/advanced
waveforms previously created in your project. Right click on a selected
waveform and a pop-up is shown with the following options (many of these
functions are the same as the Waveform Editor/Manager buttons and the
right click, discussed previously):
Library Waveforms - Contains all waveforms (.wlf) stored in the selected
library folder.
NOTE: You can select a different library folder as your default in Tools →
Options. Change the location of the Waveforms Library Path.
Waveform Sequencer Buttons
The Sequencer buttons cover many functions as the Waveform
Editor/Manager buttons discussed previously. Many are also accessible via
right clicking a selection if preferred.

Load Waveform - Loads a waveform into the project waveform tab.