Teledyne LeCroy ArbStudio - Manual (Page 210)

ArbStudio
202 922244-00 Rev A
2 Emissions which exceed the levels required by this standard may occur when the
instrument is connected to a test object.
3 This product is intended for use in nonresidential areas only. Use in residential
areas may cause electromagnetic interference.
4 Meets Performance Criteria “B” limits of the respective standard: during the
disturbance, product undergoes a temporary degradation or loss of function or
performance which is self-recoverable.
5 Performance Criteria “C” applied for 70%/25 cycle voltage dips and for 0%/250
cycle voltage interruption test levels per EN61000-4-11.
European Contact:
Teledyne LeCroy Europe GmbH
Waldhofer Str 104
D-69123 Heidelberg
Germany
Tel: (49) 6221 82700
A USTRALIA & N EW Z EALAND D ECLARATION O F C ONFORMITY
–
EMC
The instrument complies with the EMC provision of the Radio
Communications Act per the following standards, in accordance with
requirements imposed by Australian Communication and Media Authority
(ACMA):
CISPR 11:2003 Radiated and Conducted Emissions, Group 1, Class A, in
accordance with EN61326-1:2006 and EN61326-2-1:2006.
Australia / New Zealand Contacts:
Vicom Australia Ltd.
1064 Centre Road
Oakleigh, South Victoria 3167
Australia
Vicom New Zealand Ltd.
60 Grafton Road
Auckland
New Zealand
Safety Compliance
EC D
ECLARATION
O
F
C
ONFORMITY
–
L
OW
V
OLTAGE
The instrument meets intent of EC Directive 2006/95/EC for Product Safety.
Compliance was demonstrated to the following specifications as listed in
the Official Journal of the European Communities:
EN 61010-1:2010 Safety requirements for electrical equipment for
measurement, control, and laboratory use – Part 1: General requirements