Teledyne LeCroy ArbStudio - Manual (Page 133)

Operator’s Manual
922244-00 Rev A 125
B
You can add/remove waveforms/operations to the Sequencer with the
commands previously mentioned in Sequencing Analog Waveforms (on
page 73)
NOTE: the Memory Usage indicator visualizes in real time the occupation of
the hardware resources.
Signal Definitions
Use the following steps to create a new signal definition.
1. Double click Signal Definition on the Device Control Tree.
2. The Signal Definition screen is shown.
Use the Signal Definition panel to define a list of signals or buses and
choose their correspondence to the channels of the ArbStudio
1102D/1104D Digital Pattern Generator.
Only the signals defined in this panel can be viewed in the Editing
waveform window or Waveform View window.