Teledyne LeCroy ArbStudio - Manual (Page 55)

Operator’s Manual
922244-00 Rev A 47
B
Channel Out Math Tab
You can set a communication between adjacent channels allowing
computations to be performed between generated waveforms or between
a waveform and a constant.

Use the radio button to Enable operation on a channel pair.

Select the channel where the operation result is to be performed.
The selected channel is the Receiver (RX) and the other one is the
Transmitter (TX).

On the Multiplier, select the TX channel to multiply the TX waveform
with the RX waveform or select a constant to multiply the RX
waveform with a fixed voltage.

On the Addend option select the TX channel or a constant value.
Click the Add button to toggle the operator to subtraction instead.