Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 61)

USB Protocol Suite User Manual Chapter 2: General Description
LeCroy Corporation
47
2.18 Advisor T3
The LeCroy USB Advisor T3™ USB 3.0 Protocol Analyzer is a verification system for
USB development and testing. It supports both USB 2.0 and USB 3.0. It can record USB
traffic and graphically present the logical transactions and events. It connects to a laptop
or desktop PC via USB 2.0.
The system can monitor traffic between USB 2.0 links using standard high-speed
compliant cables.
If configured for USB 3.0 testing, the system supports monitoring between SuperSpeed
links using USB 3.0 cables.
2.18.1 Components
The LeCroy Advisor T3 Analyzer package includes the following:
• One LeCroy USB Advisor T3 Analyzer
• DC Power Adaptor
• USB cables (three)
• Installation CD-ROM, including documentation
• Quick Start Guide
• Carrying Case
2.18.2 Front Panel
Figure 2.11 Advisor T3 Front Panel
The front panel has the following indicators and connectors:
Power LED (green if on)
Status LED (blue if system successfully initializes)
(red while booting. If red for more than a minute, hardware failure.)
(green while initializing)
Analyzer Port A (downstream) Connects to Device under test.
Analyzer Port B (upstream)
Connects to Host.
Analyzer LEDs
Rec- Recording (red if recording enabled)
Trig- Trigger
(green if triggering)
2.0 - USB 2.0 (yellow for Low and Full Speed)
(green for Hi Speed)
3.0 - USB 3.0 (green if link is up; flashes green while data transfers;
yellow if polling)