Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 100)

Chapter 4: Software Overview USB Protocol Suite User Manual
86
LeCroy Corporation
4.6.2 Recording Status
During recording, the current Recording Status is in a segment. When you activate the
Record function, this segment flashes a message depending on the selected
Recording Options, such as Triggered or Uploading.
After recording stops,
• The flashing message changes to Uploading data–x% done (x% indicates
the percentage completion of the data uploading process).
• The traffic data copies to disk (overwriting any previous version of this file)
using the default file name data.usb. You can also create a file name by
specifying one in the Recording Options dialog box.
To abort the upload process:
• Press Esc on the keyboard
OR
• Again click in the Tool Bar.
You are asked if you want to keep or discard the partially uploaded data.
Note: While uploading is in progress, clicking the Stop button again opens a dialog
that allows you to do a partial upload, flush the current file, keep what has
uploaded at this point, or to continue uploading.
The Partial Upload button enables when you have partially uploaded data. When you
click Partial Upload, a dialog box displays options on what portion of data you want to
upload again.