Teledyne LeCroy USBTracer_Trainer - Users Manual User Manual
Page 269
USB Protocol Suite User Manual
Chapter 10: Recording Options
LeCroy Corporation
255
The Action pop-up menu has the following restart and trigger options:
•
Restart the Sequence (not shown): Restarts the sequence. Note that this option is
context-sensitive and only appears if you have created a multi-state sequence. A
thick arrow appears from the selected event and point upward towards the first
event in the sequence.
•
Restart All: Restarts all rules in all sequences and in the global state and displays
an arrow and a Restart All button. This action precludes selecting Advance the
Sequence and Restart the Sequence.
•
External Trigger Pulse HIGH: Sends an output signal with a Pulse High format
through the output ports on the back of the UPAS. Pulse High is the default format.
Pulse High causes the analyzer to transmit a 5-volt, 40-nanosecond signal.
•
Properties: Displays the Action Properties dialog for the selected action.
Event Pop-up Menu
If you click an Event button in the Main Display area, the Event pop-up menu appears.
The Event pop-up menu has the following options:
•
Specify Action(s): Opens the Actions submenu, allowing you to assign an action to
the event. Options on this submenu are the same as those on the Action pop-up,
described previously.
•
Add Counter: Adds a counter to count a specified number of times the event
occurs before the analyzer executes the corresponding action.
•
Move Event to: Moves the selected event to a different position in the Recording
Rules window.
•
Copy Event to: Copies the selected event to a different position in the Recording
Rules window.
•
Delete This Event: Deletes the selected Event. Alternatively, you can use the
Delete button on the toolbar or keyboard to delete events.
•
Properties: Displays the Event Properties dialog for the selected event.