Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 56)

Chapter 2: General Description USB Protocol Suite User Manual
42
LeCroy Corporation
• Wide range AC connector module:
• Power socket
• Power on/off switch
• Enclosed 5x20 mm 2.0A 250 V fast acting glass fuse
Warning! For continued protection against fire, replace fuse only with the type and
rating specified above.
• USB type B host computer connector
• Data In/Out DB-9 (9-pin) external interface connector
Note: The BNC connector next to the Data In/Out 9-pin DIN connector DOES NOT
PROVIDE ANY USER FUNCTIONALITY! It may have the label EXT CLK,
AUX, or TRIGGER, depending on when it was manufactured.
Do not use the BNC connector for any purpose!
(The Trigger In and Trigger Out functions are only available through the
Breakout Board accessory.)
Warning! Do not open the Analyzer enclosure. There are no operator serviceable parts
inside. Refer servicing to LeCroy.