Teledyne LeCroy USBTracer_Trainer - Users Manual - Manual (Page 49)

USB Protocol Suite User Manual Chapter 2: General Description
LeCroy Corporation
35
2.8 USBTracer System Setup
The USBTracer module inserts into the Universal Protocol Analyzer System. The UPAS
connects to a desktop or laptop PC through a USB port. The PC controls the UPAS and
Analyzer.
To set up the system hardware:
• Insert the USBTracer module into the UPAS.
• Connect the Analyzer to an AC power source.
• Connect to the analyzing PC with USB.
• Connect USB cable to the device under test.
2.9 USBTracer/Trainer Specifications
USBTracer is a hardware module that installs into the Universal Protocol Analyzer
System. The following specifications describe a combined USBTracer/Universal Protocol
Analyzer System.
2.9.1 Package
2.9.2 Connectors
2.9.3 Weight
2.9.4 Power Requirements
90 to 254 VAC, 47 to 63 Hz (universal input), 100 W maximum
UPAS 12.2 x 12.2 x 3.5 inches
(31.1 x 31.1 x 8.9 cm)
USBTracer Plug-in 4.5 x 6.7 x 1.3 inches
(11.3 x 17.0 x 3.2 cm)
UPAS AC power connection
External trigger connection
Host connection (USB, type B)
UPAS
USBTracer Plug-in 7.5 lb. (3.4 kg)
1.0 lb. (0.5 kg)